
Service and Maintenance (cont.)
Removing the Oven Doors. (Section 9)
1) Open both oven doors and remove top capping piece (secured by two screws).
Note: - Removal of both doors is identical except for door Micro-switch cam/bush attached to
top hinge pin of right-hand door.
Fig. 11
2) Remove two screws (A) and nuts (B), with spring and plain washers.
3) Slide top hinge bush (C) out of slot in top channel (D) and lift bottom hinge pin out of bush (E) in
bottom channel (F).
4) Fit new hinge bush to bottom channel. Fit new hinge bush and original hinge plate to top hinge
(together with micro-switch cam/bush on right-hand door).
5) If necessary remove plug buttons (G) and fit new or original handle (H), securing with set screws
(J), washers and nuts.
6) Refit door/s by reversing removal procedures. Ensure that cam/bush on right-hand door
correctly operates micro-switch when doors are closed.
7) Fit and/or adjust door catch plate (K), as necessary using screws (L). Ensure that doors seal
correctly against front of oven and are retained securely by catches.
Fig. 11
Manual Part No: 930087-01 SNORKEL Gas Convection Oven - 33 –
Manual Rev No: 1
Commentaires sur ces manuels